產品詳情
步驟,模具產品強度高、質量好,表面光滑的工廠,使用壽命和化糞池模具大小標準,誤
差很小,得到了全國各地客戶的廣泛,是目前化糞池模具行業的新產品。
The cement septic tank mold is easy to install, quickly released and
recyclable. Compared with the traditional mold, it does not need too many
installation steps. The mold products are factory with high strength, good
quality and smooth surface. The service life and septic tank mold size are
standard, and the error is very small. It has been widely recognized by
customers all over the country. It is a new product in the septic tank mold
industry at present.
化糞池模具如果在材料選擇方面不下功夫,將會出現整個模具不能使用的情況,材料性能
不佳,耐磨性能不夠好,都會對其有影響。其次在模具設計和制作工藝有缺陷,凸凹模、
鍛坯改鍛工藝不完善,遺存有熱處理隱患,結構設計問題,沖模結構不合理,細長凸模沒
有設計加固裝置,出料口不暢現堆集,制模工藝不完善,熱處理技術及工藝有問題,造成
凸、凹模淬不透。整個結構包括池體和位于池體上的進污口和出水口,池體內部設有將池
體分隔開的隔板,隔板上設有通孔。池體呈圓筒狀,其上部設有檢查口。相對于普通的池
子結構更強,承壓力也更強。
If the septic tank mold does not work hard in material selection, the whole
mold will not be used. Poor material perbance and poor wear resistance will
affect it. Secondly, there are defects in the die design and manufacturing
process, the transbation process of punch and die and forging blank is
imperfect, there are hidden dangers of heat treatment, structural design
problems, unreasonable die structure, no reinforcement device is designed for
slender punch, the discharge port is not smooth and stacked, the die making
process is imperfect, and there are problems in heat treatment technology and
process, resulting in the incompleteness of punch and die quenching. The whole
structure comprises a tank body and a sewage inlet and outlet located on the
tank body. A partition plate separating the tank body is arranged inside the
tank body, and a through hole is arranged on the partition plate. The tank body
is cylindrical, and its upper part is provided with an inspection port.
Compared with the ordinary pool structure, the bearing pressure is also
stronger.