產品詳情
西門子功率模塊6SL3210-1PE27-5UL0
|
SINAMICS G120 功率模塊 PM240-2 未過濾 帶集成式制動斬波器 380-480V+10/-20% 三相交流 47-63Hz 重過載功率：30kW 當 200% 3S，150% 57S， 100% 240S；環境溫度 -20 至 +50°C(HO);功率 輕過載：37kW 當 150% 3S，110% 57S， 100% 240S；環境溫度 -20 至 +40°C(LO) 472x 200x 237（高x寬x深）,FSD 防護等級 IP20 不帶控制單元和 操作單元 批準從 CU 固件- 版本 V4.7 HF8 |
概述PM240?2 Power Modules – 0.55 kW to 250 kW (0.75 hp to 400 hp), IP20 degree of protection
PM240?2 Power Modules, frame sizes FSA to FSG (with Control Unit and Operator Panel)
The PM240?2 Power Modules are based on a new hardware platb. This permits an increase in power density as well as the application of innovative cooling concepts (push-through technology) with especially high requirements in terms of control cabinet cooling.
Furthermore, the PM240-2 Power Module is also suitable for use in safety-oriented applications. In conjunction with a fail-safe Control Unit, the drive can be transbed into a Safety Integrated Drive (see section Control Units).
The PM240?2 Power Modules in frame sizes FSA to FSF are available both with and without an integrated line filter class A of compact design for 200 V, 400 V and 690 V line voltages (except PM240?2 frame sizes FSD to FSF: 200 V). The PM240?2 Power Modules in frame size FSG are available with an integrated line filter Category C3 of compact design for 400 V and 690 V line voltages, also with integrated line filter Category C2 for a line voltage of 400 V. In addition, a DC b reactor is integrated in the PM240?2 Power Modules, frame sizes FSD to FSG, and therefore no line reactor is required.
The PM240-2 Power Modules with integrated line filter class A are suitable for connection to TN supply systems. Power Modules without integrated line filter can be connected to grounded TN/TT systems and non-grounded IT systems.
The PM240?2 Power Module has an integrated braking chopper. In generating mode, the excess energy of the DC b can be dissipated by means of an optional braking resistor.
The permissible cable lengths between converter and motor are limited (for max. permissible cable lengths, see Integration). Longer cables can be used if output reactors are connected (see section Load-side power components).
Push-through variant
Example: PM240?2 Power Modules, degree of protection IP20, push-through variant, frame sizes FSD to FSF (with Control Unit and Operator Panel)
The push-through variants in the frame sizes FSA to FSF allow the cooling fins of the Power Modules to be pushed through the rear panel of the control cabinet. Push-through variants should be used in applications where the amount of power loss generated inside the control cabinet itself must be minimized.
Shield plates and shield connection kits are available for use in the wiring installation of Control Units and Power Modules to ensure that it complies with EMC guidelines.
For more inbation, see Shield connection kits for Control Units and Power Modules in section Supplementary system components.
PM250 Power Modules, frame sizes FSC to FSF
PM250 Power Modules are suitable for a large number of applications in general mechanical engineering. Any braking energy is directly fed back into the line supply (four-quadrant applications – a braking chopper is not required).
The PM250 Power Module features an absoluby unique technology – Efficient Infeed Technology. This feature provides the ability to feed energy back into the supply system in the generator mode (electronic braking) so that the energy is not converted into heat in a braking resistor. This saves space in the control cabinet. The time-consuming process of dimensioning the braking resistor and the expense of the extra wiring are eliminated. Furthermore, heat losses in the control cabinet are reduced.
河南兆陽自動化科技有限公司銷售西門子千萬余產品 盡新老顧客您來詢價訂貨采購，歡迎您來兆陽公司，謝謝您的光臨！
連系人 ：邵經理
電 ：191+ 39 98+ 27 30 同微號
Further, the innovative circuit design reduces the line harmonics. There is no need to use an optional line reactor at the supply infeed. This saves space and costs for engineering and procurement.
The permissible cable lengths between converter and motor are limited (for max. permissible cable lengths, see Integration). Longer cables can be used if output reactors are connected (see section Load-side power components).
Frame sizes FSD to FSF of the PM250 Power Modules are available both with as well as without integrated line filter class A.
For frame size FSC of the PM250 Power Module with an integrated line filter class A, an additional base filter of class B is available for achieving class B (see section Line-side components).
The PM250 Power Module is also designed for safety-oriented applications. In conjunction with a fail-safe Control Unit, the drive can be transbed into a Safety Integrated Drive (see section Control Units).
The PM250 Power Modules with integrated line filter class A are suitable for connection to TN supply systems. Power Modules without integrated line filter can be connected to grounded TN/TT systems and non-grounded IT systems.
Note:
Shield plates and shield connection kits are available for use in the wiring installation of Control Units and Power Modules to ensure that it complies with EMC guidelines.
For more inbation, see Shield connection kits for Control Units and Power Modules in section Supplementary system components.
集成
All Power Modules have the following connections and interfaces:
- PM?IF interface to connect the Power Module to the Control Unit. The Power Module also supplies power to the Control Unit using an integrated power supply
- Motor connection using screw-type terminals or screw studs
- 2 PE/protective conductor connections
- Shield connection plate
Connection example for PM240?2 Power Modules, frame sizes FSA to FSC, with or without integrated line filter
Connection example for PM240?2 Power Modules, frame sizes FSD to FSG, with or without integrated line filter
西門子功率模塊6SL3210-1PE27-5UL0
SINAMICS G120 是一個由多種不同功能單元組成的模塊化變頻器。兩種主要的單元是：
●控制單元（CU）
●功率模塊（PM）
控制單元可以以幾種不同的方式對功率模塊和所接的電機進行控制和監控。它支持與本地或中央控制的通信并且支持通過監控設備和輸入/輸出端子的直接控制。功率模塊支持的電機的功率范圍為0.37kW至250kW。功率模塊由控制單元里的微處理器進行控制。高性能的IGBT電機電壓脈寬調制技術和可選擇的脈沖頻率的采用，使得電機運行極為靈活可靠。多方面的保護功能可以為電機提供更高一級的保護。
面向未來的模塊化設計理念，提供了變頻器的高度靈活性：
－每一個部件的創新都可以改善現有的變頻器系統
－用戶可以按照需要選擇和組合
－可以只購買所需功能的相應模塊
－可以在帶電的狀態下進行模塊更換(熱插拔)
－可拆卸的接線端子
－模塊的更換更加簡單，使維護更加方便
●安全保護功能的集成，使得它更好的應用于有安全保護要求的設備和工廠
●提供更強大的支持PROFIdrive Profi l 4.0 的PROFIBUS 通訊
－減少了接口數量
－全廠范圍內組態
－操作更加簡單
●創新的冷卻理念和加涂層的電子模塊加強了環境適應能力
●設備更換更加簡單，通過基本操作面板和MMC卡進行參數克隆更加省時
●采用高的脈沖頻率，保證電機的低噪聲運行
●緊湊，節省安裝空間的設計
●通過參數即可完成 50 Hz 或 60 Hz 電機 (IEC 或 NEMA 電機) 的設置
●可進行數字量輸入的 2/3 線選擇（電平/脈沖信號）完成常用的控制方式的設置
●可以通過通用工具 SIZER，STARTER 和 Drive ES 進行工程設置和調試，保證了組態的簡單和調試的方便—由于 Drive ES BasicSTARTER 集成在 STEP 7中，這就保證了數據的集中保存和通信的連續性
●符合世界范圍的認證: CE，UL，cUL，c-tick 以及集成的安全保護標準 IEC 61508 SIL 2
河南兆陽公司在經營活動中精益求精，具備如下業務優勢：
SIEMENS 可編程控制器1、SIMATIC S7 系列PLC：S7-200、S7-1500、S7-1200、S7-1500、S7-300、S7-400、ET-200邏輯控制模塊 LOGO！230RC、230RCO、230RCL、24RC、24RCL等
2、SITOP直流電源 24V DC 1.3A、2.5A、3A、5A、10A、20A、40A可并聯.3、 HMI 觸摸屏TD200 TD400C K-TP OP177 TP177,MP277 MP377,
SIEMENS 交、直流傳動裝置
4、 交流變頻器 MICROMASTER系列：MM420、MM430、MM440、G110、G120.
MIDASTER系列： MDV
5、全數字直流調速裝置 6RA23、6RA24、6RA28、6RA70、6SE70系列
SIEMENS 數控 伺服電機
6、SINUMERIK:801、802S 、802D、802D SL、810D、840D、611U、S120
系統及伺服電機，力矩電機，直線電機，伺服驅動等備件銷售。
西門子PLC模塊 西門子變頻器 西門子觸摸屏 西門子電線電纜 西門子數控系統等
