產品詳情
83X3F科氏力質量流量計
Promass 83X
Promass 83X3F, DN350 14"
Proline Promass 83X 科氏力質量流量計
四管結構，容量最大，配套的變送器帶擴展功能。
帶觸摸控制的四行背光顯示
一體化或分離型儀表
HART, PROFIBUS PA/DP, Modbus RS485, FF, EtherNet/IP
Promass 83X滿足油氣行業的測量要求。典型應用包括管道作業與油船、卡車以及有軌電車的運輸。Promass X流量計測量精準的關鍵在于其獲得專利的四管設計，這一設計為全球首創。Promass 83X四管質量流量計直徑為14英寸，測量精度高達0.05％，是需要高可靠性與低維護需要的高流速測量場合的最佳選擇。帶診斷功能與數據備份功能，提升過程質量
PremiumCal可提供最佳性能
一體化多變量流量測量
平衡的四管測量系統設計，抗震性好
結構堅固，不受外部管道作用力影響
無需進出口直管段，安裝簡便
可選擇批量測量與濃度測量軟件作為擴展功能科氏力側量原理不受流體本身的物理性質所影響，例如粘度和密度。
極其精確地測量液體和氣體，如油、潤滑劑、燃料、液化氣、溶劑和壓縮氣體。
質量流量測量高達4100 t/h (4520 tn. sh./h)
法蘭：直徑 300, 350, 400 (12", 14", 16")
流體溫度可高達+180 °C (+356°F)
過程壓力可高達100 bar (1440 psi)
危險區域認證
ATEX, FM, CSA, TIIS, IECEx, NEPSI測量原理 科氏力
主要特點 The highest capacity four‐tube flowmeter with extended transmitter functionality. For highest flow rates and outstanding perbance in on/offshore applications in the oil & gas industry.
特點 Increased profit – single installation point providing premium accuracy for large quantities. Fewer process measuring points – multivariable measurement (flow, density, temperature). Spacesaving installation – no in/outlet run needs. Nominal diameter: DN 300 to 400 (12 to 16"). Four‐tube system with low pressure drop.
Transmitter features Quality – software for filling, density & concentration, advanced diagnostics. Flexible data transfer options – numerous communication types. Automatic recovery of data for servicing. 4‐line backlit display with touch control. Device in compact or remote version.
直徑 DN 300 to 400 (12 to 16")
Wetted materials Measuring tube: 1.4404 (316/316L)
Connection: 1.4404 (316/316L)
Measured variables Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration
測量誤差 Mass flow (liquid): ±0.1 (standard), 0.05 % (option)
Volume flow (liquid): ±0.1 %
Mass flow (gas): ±0.35 %
Density (liquid): ±0.0005 g/cm³
量程 0 to 4100 t/h (0 to 4520 tn. sh./h)
壓力范圍 PN 100, Class 600
過程溫度 –50 to +180 °C (–58 to +356 °F)
環境溫度 Standard: –20 to +60 °C (–4 to +140 °F)
Option: –40 to +60 °C (–40 to +140 °F)
Sensor housing material 1.4404 (316L), highest corrosion resistance
Transmitter housing material Powder‐coated die‐cast aluminium
1.4301 (304), sheet
CF3M (316L), cast
電子插件的防護 IP67, type 4X enclosure. Remote transmitter: IP67, type 4X enclosure
顯示/操作 4‐line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible
輸出 4 modular outputs:
0‐20 mA (active)/4‐20 mA (active/passive)
Pulse/frequency/switch output (passive)
Relay
輸入 2 modular bs:
Status
0‐20 mA (active)/4‐20 mA (active/passive)
通信 HART, PROFIBUS PA/DP, FOUNDATION Fieldbus, Modbus RS485, EtherNet/IP
Power supply DC 16 to 62 V
AC 85 to 260 V (45 to 65 Hz)
AC 20 to 55 V (45 to 65 Hz)
防爆認證 ATEX, IECEx, FM, CSA, NEPSI
Other approvals and certificates 3.1 material, calibration perbed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR, SIL, marine
PED, CRN, AD 2000
NACE MR0175/MR0103, PMI; welding test acc. to EN, ASME, NORSOK
測量原理 科氏力
主要特點 The highest capacity four‐tube flowmeter with extended transmitter functionality. For highest flow rates and outstanding perbance in on/offshore applications in the oil & gas industry.
特點 Increased profit – single installation point providing premium accuracy for large quantities. Fewer process measuring points – multivariable measurement (flow, density, temperature). Spacesaving installation – no in/outlet run needs. Nominal diameter: DN 300 to 400 (12 to 16"). Four‐tube system with low pressure drop.
Transmitter features Quality – software for filling, density & concentration, advanced diagnostics. Flexible data transfer options – numerous communication types. Automatic recovery of data for servicing. 4‐line backlit display with touch control. Device in compact or remote version.
直徑 DN 300 to 400 (12 to 16")
Wetted materials Measuring tube: 1.4404 (316/316L)
Connection: 1.4404 (316/316L)
Measured variables Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration
測量誤差 Mass flow (liquid): ±0.1 (standard), 0.05 % (option)
Volume flow (liquid): ±0.1 %
Mass flow (gas): ±0.35 %
Density (liquid): ±0.0005 g/cm³
量程 0 to 4100 t/h (0 to 4520 tn. sh./h)
壓力范圍 PN 100, Class 600
過程溫度 –50 to +180 °C (–58 to +356 °F)
環境溫度 Standard: –20 to +60 °C (–4 to +140 °F)
Option: –40 to +60 °C (–40 to +140 °F)
Sensor housing material 1.4404 (316L), highest corrosion resistance
Transmitter housing material Powder‐coated die‐cast aluminium
1.4301 (304), sheet
CF3M (316L), cast
電子插件的防護 IP67, type 4X enclosure. Remote transmitter: IP67, type 4X enclosure
顯示/操作 4‐line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible
輸出 4 modular outputs:
0‐20 mA (active)/4‐20 mA (active/passive)
Pulse/frequency/switch output (passive)
Relay
輸入 2 modular bs:
Status
0‐20 mA (active)/4‐20 mA (active/passive)
通信 HART, PROFIBUS PA/DP, FOUNDATION Fieldbus, Modbus RS485, EtherNet/IP
Power supply DC 16 to 62 V
AC 85 to 260 V (45 to 65 Hz)
AC 20 to 55 V (45 to 65 Hz)
防爆認證 ATEX, IECEx, FM, CSA, NEPSI
Other approvals and certificates 3.1 material, calibration perbed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR, SIL, marine
PED, CRN, AD 2000
NACE MR0175/MR0103, PMI; welding test acc. to EN, ASME, NORSOK
