產品詳情
UTP 83 FN cast iron
Classifications graphite-basic coated FeNi stick electrode
EN ISO 1071 AWS A5.15
E C NiFe-11 E NiFe-Cl
Characteristics and field of use
UTP 83 FN is suitable for surfacing and joining of all commercial cast iron grades, such
as lamellar grey cast iron and nodular cast iron, malleable cast iron and for joining these
materials to steel or cast steel. This stick electrode is particularly used where a high deb
rate is needed.
UTP 83 FN has an excellent melting perbance and the easily controllable transfer
provides a spatterfree deposit of perfect appearance. The weld deposit is easily machinable
with cutting tools, tough and crack-resistant.
Hardness of the pure weld bl: approx. 190 HB
Typical analysis in %
C Ni Fe
1,3 52,0 balance
Welding instruction
The casting skin and impurities have to be removed from the welding area. Weld with low
amper-age and short arc. For the purpose of stress relief in case of difficult weldings, peen
the weld bl and reduce the heat b by welding short beads.
Welding bs
Current type DC (+) / AC
Form of delivery and recommended welding beters
Electrodes Ø mm x L 2,5 x 300 3,2 x 350 4,0 x 350
Amperage 50 – 70 70 – 100 100 – 130
Classifications graphite-basic coated FeNi stick electrode
EN ISO 1071 AWS A5.15
E C NiFe-11 E NiFe-Cl
Characteristics and field of use
UTP 83 FN is suitable for surfacing and joining of all commercial cast iron grades, such
as lamellar grey cast iron and nodular cast iron, malleable cast iron and for joining these
materials to steel or cast steel. This stick electrode is particularly used where a high deb
rate is needed.
UTP 83 FN has an excellent melting perbance and the easily controllable transfer
provides a spatterfree deposit of perfect appearance. The weld deposit is easily machinable
with cutting tools, tough and crack-resistant.
Hardness of the pure weld bl: approx. 190 HB
Typical analysis in %
C Ni Fe
1,3 52,0 balance
Welding instruction
The casting skin and impurities have to be removed from the welding area. Weld with low
amper-age and short arc. For the purpose of stress relief in case of difficult weldings, peen
the weld bl and reduce the heat b by welding short beads.
Welding bs
Current type DC (+) / AC
Form of delivery and recommended welding beters
Electrodes Ø mm x L 2,5 x 300 3,2 x 350 4,0 x 350
Amperage 50 – 70 70 – 100 100 – 130
