產(chǎn)品詳情
BÖHLER FOX CEL 85 Stick electrode
Classifications unalloyed cellulosic
EN ISO 2560-A: AWS A5.5:
E 46 4 1Ni C 2 5 E8010-P1
Characteristics and field of use
Higher-strength, cellulose coated Stick electrode for vertical down welding0n large pipelines. Highly
economical compared to vertical up welding. Particularly suitable for hot pass, filler and cover
pass welding0n higher-strength pipe steels. FOX CEL 85 is0ne of the most widely used cellulose
electrodes, and meets the highest quality demands in large pipeline construction. It is characterised
by a very intensive, fine-droplet depositing, as well as good toughness properties. Insensitive to
weather conditions, high resistance to the bation of shrinkage grooves. HIC and SSC resistance
tested according to NACE TM 02-84 or TM 01-77.
Base materials
L415NB-L450NB, L415MB-L450MB API Spec. 5 L: X 56, X 60, X 65
Typical analysis of all-weld bl (Wt-%)
C Si Mn Ni
0.14 0.15 0.75 0.7
Mechanical properties of all-weld bl
Heat
Treatment
Yield
strength
0.2%
Tensile
strength
Elongation
(L0=5d0)
Impact values
ISO-V
MPa MPa % +20°C: ±0°C: -20°C: -40°C:
untreated 490 570 23 110 105 100 70
Operating data
Polarity = +
Dimensions (mm) Amperage A
3.2 x 350 80-130
4.0 x 350 120-180
5.0 x 350 160-210
Approvals and certificates
TüV (1361.), ABS (E8010-P1), SEPROZ, CE
Classifications unalloyed cellulosic
EN ISO 2560-A: AWS A5.5:
E 46 4 1Ni C 2 5 E8010-P1
Characteristics and field of use
Higher-strength, cellulose coated Stick electrode for vertical down welding0n large pipelines. Highly
economical compared to vertical up welding. Particularly suitable for hot pass, filler and cover
pass welding0n higher-strength pipe steels. FOX CEL 85 is0ne of the most widely used cellulose
electrodes, and meets the highest quality demands in large pipeline construction. It is characterised
by a very intensive, fine-droplet depositing, as well as good toughness properties. Insensitive to
weather conditions, high resistance to the bation of shrinkage grooves. HIC and SSC resistance
tested according to NACE TM 02-84 or TM 01-77.
Base materials
L415NB-L450NB, L415MB-L450MB API Spec. 5 L: X 56, X 60, X 65
Typical analysis of all-weld bl (Wt-%)
C Si Mn Ni
0.14 0.15 0.75 0.7
Mechanical properties of all-weld bl
Heat
Treatment
Yield
strength
0.2%
Tensile
strength
Elongation
(L0=5d0)
Impact values
ISO-V
MPa MPa % +20°C: ±0°C: -20°C: -40°C:
untreated 490 570 23 110 105 100 70
Operating data
Polarity = +
Dimensions (mm) Amperage A
3.2 x 350 80-130
4.0 x 350 120-180
5.0 x 350 160-210
Approvals and certificates
TüV (1361.), ABS (E8010-P1), SEPROZ, CE
