產(chǎn)品詳情
Connectors
Each unit is supplied with signal connectors, as applicable.
When using crimp ferrules for the hazardous or non-hazardous
(safe) signal connectors the bl tube length should be 12mm
and the wire trim length 14mm.
Isolation 250V rms, tested at 1500V rms minimum, between safe- and hazardous-area terminals. MTL4500: 50V between safe-area circuits and power supply MTL5500: 250V rms between safe-area circuits and power supply Supply voltage 20 – 35V dc Location of units Safe area Terminals Accepts conductors of up to 2.5mm2 stranded or single-core Mounting MTL4500 MTL4500 range of backplanes MTL5500 T-section 35mm DIN rail (7.5 or 15mm) to EN 50022 Ambient temperature limits –20 to +60°C (–6 to +140°F) operating –40 to +80°C (–40 to +176°F) storage Humidity 5 to 95% relative humidity Weight Approximate (except where indicated) MTL4500 140g MTL5500 150g EMC To EN61326 and NE21*
Isolation 250V rms, tested at 1500V rms minimum, between safe- and hazardous-area terminals. MTL4500: 50V between safe-area circuits and power supply MTL5500: 250V rms between safe-area circuits and power supply Supply voltage 20 – 35V dc Location of units Safe area Terminals Accepts conductors of up to 2.5mm2 stranded or single-core Mounting MTL4500 MTL4500 range of backplanes MTL5500 T-section 35mm DIN rail (7.5 or 15mm) to EN 50022 Ambient temperature limits –20 to +60°C (–6 to +140°F) operating –40 to +80°C (–40 to +176°F) storage Humidity 5 to 95% relative humidity Weight Approximate (except where indicated) MTL4500 140g MTL5500 150g EMC To EN61326 and NE21*
